ELEGANT AUTO BOOM
This True automatic tracking Wheel aligner enables technicians to do measurements and adjustments at different lifting heights. Compensations on ground level and adjustments on lifting level.
Features
- Compatible Wheel aligner for Lift construction (Scissor lift and Four post lift).
- True automatic tracking camera boom depending on the vehicle heights.
- Wider wheel clamp 11″ to 24″
- User friendly graphical user interface software for technician
- Equipped with 22″ monitor
- Unique in-built computer for alignment
- High resolution HD camera
- High durability aluminium turn plates
- Wheel base up to 4 meters
- Option for selection of vehicle specification during alignment
- Thrust angle compensation & Animated Runout compensation
- Water proof & dust proof, Light weight Target
- Voice over notification during alignment operation
Features & Benefit
- Clear floor design- Makes working beneath the vehicle easy
- Arm resistant on each arm engages when the vehicles is lifted
- Separate power panel ensures more safety from electrical hazard.Dead man controls system- 24 V DC
- Equipped with Hose bust valve to prevent damage from hose / crimping end failure
- Manual release locking system for two sides
- Two full stroke cylinders- one in each column
- Rubber pad for door opening protection
- Telescopic Arm pads for quick and easy vehicle contacts
Specifications
Parameter | Unit | Data |
---|---|---|
Rim diameter | Inches | 11 to 24 |
Wheelbase range | mm | 1750 to 4000 |
Track width range | mm | 1210 to 2430 |
Camera to turn table distance | mm | 1800 to 2500 |
Measurement accuracy | mm | 00º01′ / 0.1 |
Power supply | – | 1ph, 230V, 50Hz |
Machine dimension (LxWxH) | mm | 2932 x 515 x 3000 |
Parameter | Range | Accuracy |
Camber | ± 8º | ± 2′ |
Caster | ± 20º | ± 4′ |
Kingpin Inclination | ± 20º | ± 4′ |
Toe-in & Toe-out | ± 20º | ± 2′ |
Thrust angle | ± 5º | ± 2′ |